Replaces
Frequently bought together
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace and service your taillights on this 2005 Ford Focus. There are no tools required for this. All you need are new taillights from 1AAuto.com.
On the back of your taillight you'll see these three thumb screws. We'll just fast-forward as Don twists those out by hand. Once those are removed your taillight pulls out. To disconnect these harnesses, push in on the tabs and pull it free. They can be a little difficult to remove. Just move them back and forth while pushing in those tabs, and eventually they will pull free.
To service your taillight bulbs, just twist the socket out, pull the old bulb out, push the new one in, and twist your socket back into place. For this bulb, it's the same thing. Just twist it out, pull the bulb out, push the new one in, and twist the socket back into place.
Reconnect your two harnesses, line up the studs on the taillight, and push it back into place. And we'll just fast-forward as Don replaces those three thumb screws.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
LHT06136
