★★★★★
August 17, 2021
Didn't have time for a photo. But outstanding looking product. Super happy. After replacing the passenger, decide to replace the driver side.
Replaces
Replaces 2004-10 Toyota Sienna Front Wheel Drive Front 4 Piece Drivetrain Kit TRQ PSA27222
$454.95
Replaces 2004-10 Toyota Sienna All Wheel Drive Front 4 Piece Drivetrain Kit TRQ PSA27224
$434.95
Replaces 2004-10 Toyota Sienna Front Wheel Drive Front 14 Piece Steering, Suspension, & Drivetrain Kit TRQ PSA24902
$419.95
Part Details
Specifications
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Product Features
TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Paint To Match Note:
"Paint-to-match finish" refers to a smooth, paintable surface. This item is not painted. Paint offers better coverage and adhesion, but it is not necessary for installation.
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This part fits 1 vehicle spanning 2004-2010.
| Year | Make | Model | Description |
|---|---|---|---|
| 2004-2010 | Toyota | Sienna | Toyota Sienna Driver Side Power Heated Paint to Match Mirror with Heat TRQ MRA05579 |
| Brand Label | Part Number |
|---|---|
| Toyota | 87940AE020 |
| Toyota | 87940-AE020 |
| DIY Solutions | MIR00842 |
| TYC | 5350142-1 |
| Partslink Numbering System | TO1320205 |
| Hollander | 128-61419B |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com. Your source for quality replacement parts and the best service on the internet.
Hi. I'm Mike from 1A Auto. I hope this how to video helps you out, and next time you need parts for your vehicle think of 1AAuto.com. Thanks.
In this video we're going to show you how to replace a side mirror. You'll see the owner of this van accidentally kind of broke their side mirror and fixed up with some nice pink duct tape. Pretty easy procedure. This is a 2008 Toyota Sienna. This procedure is basically the same for any 2004 to 2010. We'll show you the driver side, passenger side. It's obviously very similar procedure. The only tools you'll need are a Phillips screwdriver, flat-blade screwdriver, and either a 10mm wrench or a 10mm socket with a ratchet.
Okay, so you can see here the owner was going for maybe some style points actually they were just looking to keep their mirror on there until their new one from 1A Auto came in. The pink duct tape does the job but let's be real it's not really what you want to have holding your car together for the long term. You need to open up, and the first thing you're going to need to do is remove the duct tape first, and after that then you're going to want to remove your inside door panel. This piece of plastic trim comes right off. You just have to pull firmly at the top, it's up and out, and then pull your inside door handle back and pry between the lock and this bezel and that bezel comes right out. Now there's three screws to remove. They are all Phillips, one right in there, one down here, and then one here, and then you're going to pry out and use your Phillips screwdriver to get this plug out in the back here. I'm just going to fast forward as I remove those three Phillips screws. The small plug on the end you need to kind of pry it, pull it out a little bit then use the screwdriver to unscrew the small center plug and then it should come out.
Grab back here firmly, work fingernails underneath or your fingers underneath and pull up firm there and then pull this back up and out, and your switch disconnects right here. Unplug this, there's a tab here, push on the tab and hold back just on the plastic ears here. Let me show you how this works. It's already reset, but this whole thing actually slides back, so once you take it apart make sure you pull this back as far as it will go. Now you see two Phillips screws right here, remove those. This cap lifts up and out of the way. There's another Phillips screw right here, remove that, and go down to the bottom here basically grab this corner, kind of lift up and out with this end down here and this end. Nice and firm. Now it comes up.
There's two cables here. Take them out of that pin there. Looking in behind here there are a little hard to film but you just pull these cables out and they rotate and come up and out, and there's one last connection right here, press the little tab. Our mirror is plugged in right here. There's a little tab, push, unplug, and actually remove the most part of the mirror. Okay, busted mirror with the pink duct tape off. Okay still you have to remove these three 10mm nuts and remove the remaining base off. Any 10mm wrench would work just fine. I prefer 10mm socket ratchet. Hold the back side. Okay, new mirror from 1A Auto one obvious benefit is the fact that the mirror and base are all one piece it's going to go on there, it's going to plug in just like the original. The other benefit or maybe you'd like the pink duct tape, but there's no pink duct tape on this one, and it's just going to right install just like the reverse. Make sure you put the harness through. It has the rubber pad and gasket, just make sure you pull the harness all the way through, it doesn't get pinched, and that the studs go in, and it comes with new bolts. Thread those on.
Okay and then tighten them up, just tighten them to get them firm, but you don't want to over tighten them. Once you basically feel it's getting tight that's when you stop, and bring this down. Make sure that's hooked back up on there, plug in the harness, and see the keys are here. Okay outside, inside, down, up it's all working correctly. Okay reinstall the door panel. Let's connect our courtesy light first, now these cables, pull them over and you put them down in first and then flip them around and lock them in place, okay, down and first. Lock in place, just test to make sure you hook them up correctly. Get the door panel closer and put the cables in to the little clip here. First make sure you push the panel against the window and slide it down in place. If it lines up there that's good, just around the edge and set the clips back in to place.
Okay now we can put it back together. This large screw's first. While tightening that just to make sure that our window switch harness is up through. Connect this piece of trim next. I'll put this screw in for the door handle. Okay now you're going to reinstall this, like I said before make sure this is pulled all the way back and the plug should go in kind of put it in but don't get in some pressure on the wires and then push the whole cage right in, and work the harness down in, put the front end first and then bring the rear down into place, snap it in. Okay now it's just a matter of two more screws. Just make sure you pull the center out away, push it in and just push that to lock it in place, and then your trim panel put it back, lock it in and then this panel, it's got a tab right here that goes down and then push it in place.
We hope this helps you out. Brought to you by www.1AAuto.com your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the internet and in person.
Didn't have time for a photo. But outstanding looking product. Super happy. After replacing the passenger, decide to replace the driver side.
The mirror fits perfectly in my vehicle, and the instruction video explaining the installation was marvelous. The whole project took about 40 minutes, the only hang-up being re-installing some of the cables.
Our new driver knocked off the side mirror when learning how to pull out of the garage. She was very glad when her price came to under $50. for the part instead of $300 for the dealer to buy and install. Because of temps in the -50's and an unheated garage, we thought we'd have a local auto place install for only $30. But with all the bad weather, his mechanics were busy fixing all the busted up cars in the city and didn't get to ours. So, after a prayer and careful attention to the excellent 1A instructional video, we are thankful to say that we did it ourselves in about 30 minutes without further damage to the car! Win-Win! Also, the part came in two days and was in excellent condition, it works great and we will definitely look to 1A for our future fixes!
I ordered this piece and received it within the time frame. It fit perfectly and just as described.
This mirror is priced correctly at $45. It doesn't fit perfectly to the door with small gaps around the perimeter. But the real problem is the motorized mirror mechanism is not stiff enough, so the mirror jiggles around. This is quite irritating, and might actually be dangerously distracting. My local Toyota dealer is happy to sell me an OEM mirror for $280, but you can find OEM online for $160. If you think the jiggle will bother you, spend the extra money. I plan to.
Fit and functioned perfectly. Shipped free in less than a week.
The mirror is not for a Toyota Sienna LIMITED. The Limited mirror has many more functions then the standard mirror. In an attempt to return the mirror the shipping costs exceed what I had paid for the mirror so I am stuck with a mirror I can not use. John Blechschmidt
This was perfect. The instructional video is very good. The mirror matches perfectly in shape and size the original unit. Product shipped in very short time. I purchased it on a Saturday, the purchase was processed on Sunday and it took only three days for delivery. I liked the attention tot details in the packaging, so that the mirror is delivered intact.
Shipped on schedule. My 12 yr old son and I followed the install as demonstrated in the 1A youtube video (thanks!). He did most of the install. Mirror worked straight away, just as original. So far so good. Good experience w/ 1A. Would purchase again.
The electrical plug in could be different if you do not replace the mirror in an option for option fashion. The mirror would however bolt onto the door the same.
You may view the electrical harness on your OEM mirror, or if you do not want to remove the door panel to access we recommend taking the VIN number and speaking to a local Toyota Part's Department. They will be able to provide this information.
