Replaces
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the headlights on this 2005 Ford Excursion. We show you on the passenger's side, but the driver's side is the same procedure. The items you'll need for this includes new headlights from 1AAuto.com, a 7/32 socket, and a ratchet.
Start off by removing these four 7/32 screws. There are two up top, and there are two down here. It's kind of hard to see, but they're straight back. We'll just fast-forward as Don removes those four screws. Then I reach in behind the light, push the tab on the harness, and disconnect it. Now you can pull the headlight straight out. Just tilt it forward, push the tabs on either side of this harness, and disconnect it. Then push the tab underneath this harness and pull it free.
Now, to service your bulbs, for the main bulb, you just twist it counterclockwise and it pulls out. Then you twist your new one in clockwise. For this one, twist the socket out counterclockwise. The bulb pulls out, and you just push your new bulb straight in and twist the socket back in clockwise to lock it same thing with this smaller one.
On the left is the old headlight; on the right is the new one from 1A Auto. You can see they're identical, and they'll fit exactly the same. Connect your harnesses to your new headlight and push the headlight back into place. Now reach back and reconnect this harness. For these lower bolts, it helps to reach in through the wheel well here, and just hold them into place. Then tighten them with your socket and ratchet and an extension from the front. You do the same thing with the other lower bolt. We'll just fast-forward as Don tightens those up and then replaces the two up top and tightens those as well.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.
In this video we're going to show you how to remove and reinstall the taillight, whether you need to replace a broken taillight or you're just looking to replace a bulb. We're working here on a 2003 F250, same as any super duty truck of this era. The only tool you'll need is an 8mm wrench or socket with ratchet.
Okay, pretty straight forward. On the backside here there's two bolts that you need to remove. These bolts are 8mm. Speed it up here as I use an 8mm socket with a ratchet to remove those two bolts. Okay, once you have those bolts out pull down. The bulbs twist counterclockwise to disconnect. To service the bulb just pull it out, push it back in. The same up here. The new taillight from 1A Auto, if your taillight loses a battle with a 2x4 or fire wood, which happens on my truck a lot get a nice new light from 1A Auto. It goes right in. Everything goes right together. There are a couple line-up tabs. You just kind of want to get the bulbs in. Watch those line-up tabs. Get them in place.
Okay, we'll speed it up here as I put those two 8mm bolts back in. When you tighten them up you don't want to over tighten them, because you are just tightening speed screws into plastic, so make them firm but not too tight.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free, 888-844-3393. We're the company that's here for you on the internet and in person.
