Replaces
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Install Tip: Keep & reuse your original hardware, new hardware is not included with this item.
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
This part fits 1 vehicle spanning 2003-2014.
| Year | Make | Model | Description |
|---|---|---|---|
| 2003-2014 | Volvo | XC90 | Volvo XC90 Rear Driver & Passenger Side 2 Piece Liftgate Lift Support Set DIY Solutions BHS03860 |
| Brand Label | Part Number |
|---|---|
| Tuff Support | 612903 |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
On the tailgate of your XC90, it's held up, when you put it up, by a couple of gas-charged shocks. You can see, actually, the tailgate on this vehicle is still fine, but we're going to take these off, put them back on, just to show you how to do it. Like I said, they're gas-charged, so if they get a leak, the gas will leak out of them, and then they'll cease to be able to hold up the tailgate, and you'll get a broom handle or something like that to help you out. They're very easy to replace. At 1A Auto we sell the replacements. I'll just take this one off. Our replacements go on just like the originals. You just need a small, flat blade screwdriver, and either somebody to help you out or your broom handle to hold up the tailgate.
There's a little clip here that you put your screwdriver down into, and you pry that clip out. Sometimes you need to bring it all the way out. The strut comes off. Do the same thing at the top. You can see the little slot. Lean over and see the little slot where the clip is. Pull that clip out, and it comes off. Now the tailgate is pretty heavy.
Again, my original one here is fine, so I'm going to put it back on. Make sure that clips back in. With these clips, if you need to put them back in, sometimes it's easier to load them right from the top. This has actually a little . we'll make sure that top clip is back in. This bottom clip we've got to load back on because we're just going to put this original one back on because it's working fine. Then, like I said, the new ones from 1A Auto, they work just like this. If you need to put the clip back in, it's easiest to just load it right from the top. Let's see, you just got to get one side in, stretch the other side over, and slide it down on. Then, very easily, take your new one from 1A Auto. Actually, this goes right up here and then you just pop it right on. You might have to lift it just a little higher to put that bottom one on.
If you have lifts that don't quite pull it up, I always do recommend that you replace them in pairs. If your lift struts are having trouble holding it up, we always recommend replacing them in pairs, because it's always hard to see which one is actually the one that's leaking, sometimes. Once you replace them, you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
We'll replace these hood struts and usually they start going bad in the wintertime. If you lift up your hood and it doesn't stay up, usually they start getting weaker when it's colder first. It's pretty easy. You'll want somebody to help you or just lift up your hood. Use a small flat blade screwdriver. There's a little clip here that you pry in and pull that clip off. Then let it down, holding up the hood and do the same thing down here on the bottom side. Get the little clip off and pull the strut off.
Obviously these are fine. New ones from 1A Auto are going to go on just like the originals. All they do is make sure that clip is pushed back in, and push the strut on, lift it up into place, and put it on that place right there.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Hey friends, it's Len here at 1A Auto. Today we're working on our 2004 Volvo XC90 we're going to be doing some hood pistons. The pistons basically just hold up the hood, so when you're working under it, it doesn't come down in bonk in the head. Nobody wants to get hurt by it, especially twice in one day. So for now I'm just going to use these. I'm gonna hold that. Now what I'm going to do is I'm going to start over on the other side of the vehicle. The upper end of this has a little clip. We're just going to grab that, tried to pull it out, use a small screwdriver, just pry that clip out of there. I'm going to do the same to the lower side.
If you were just taking these off and you weren't actually replacing them, you don't have to pull the clip all the way out, but since I'm replacing them, I just took it out because it makes my life a little bit easier at this point. I'll just grab it and there's our hood shock. We'll go ahead and replace this.
So here we are friends, a quick product comparison for you. Over here we have our hood strut out of our 2004 Volvo XC90. This holds the hood up. Over here we have our brand new quality 1A Auto part. Both these parts are the exact same. You've got the mounting end here. You've got your piston cartridge. Of course the shaft that goes down into the piston cartridge and then the upper mount right up along the top. It has everything you need to make this work. I don't see any reason why this wouldn't be a quality part to install into the vehicle, so I'm going to go ahead and do it.
As always, if you need this or any other part, you can always check us at 1aauto.com. Thanks
Okay, so we have our brand new quality 1A Auto part. We're just going to go ahead and install it. To do that, you line it up with the ball down on the bottom. Give it a little push. I like to give them a little tug. It's not coming off. We'll grab this one, line it up with the ball and just push this in. Oops. There it is. Bonk, bonk. Everything's nice and secure. Now we can move over and do the same to the other side of the vehicle.
Thanks for watching. Visit 1aauto.com. Your place for DIY auto repairs for great parts, great service, and more content.
Perfect! Lifts fit exactly in the proper place. Easy DIY project with the help of you instruction video. Saved me some money and time by doing it myself.
Supper easy to install, thanks All.
Part that I order work like new easy to install
Perfect match. Easy install. Work great.
Overall, totally 120% pleased with everything. Shipped on time arrived on time. Pricing was significantly cheaper than going to my dealer. If I had gone to the dealer and purchased struts and had them install them, the price would have been at close to 4 times what I paid in total. The big savings was in the installation. The dealer was prepared to charge me a completely stupid labour price. After reviewing the DIY video I realized how easily it was and I could do it myself. It was dead simple and quicker than I expected.
The liftgate supports worked great and were easy to install. I used a prop to keep the lid up. A 2nd person would help. Works like new. I also replaced the hood lifts.
After getting smacked in the head by my liftgate, again, during a cold snap, it was time to act. I got online, found the Lift Supports for my 2010 Volvo XC90 and was going to have my mechanic do the install. I'm a DIY'er but not when it comes to cars. Then, after watching videos and reading how easy it was I thought, "I got this." (the 1A video really wasn't much help) The next question was should I buy a cheap pair or spring for OEM quality parts and pay $50. These guys had great reviews and after reading how the cheaper struts had plastic parts in them, lousy return policies and multiple failures it was no contest. I got them in just a few days and had them installed in just a few minutes with a small screwdriver. There's one clip per end, 4 total, that's it. Do one side at a time, pop the clips off and when you push the new one in, it clicks into place and you're done. Also, I'm 6' 2" and always had to duck under the lift gate but after installing these new supports i
Easy like it spodda be
Awesome
Great-installed easily and they work well.
Not sure, but I think its a separate part number. Looks like its out of stock for the 07?? Suggest calling the Customer Service team.
Our parts are built to your vehicle's exact OEM specifications and should be able to fit and function like the original. Please let us know if you have any other questions.
New hardware is not included with this item and we do not sell hardware.
This is the car I installed them on.
