Replaces
Part Details
Product Features
TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality auto replacement parts and the bets service on the internet.
Hi, this is Mike from 1A Auto. I hope this how to video helps you out. Next time you need parts for your vehicle, think of 1AAuto.com. Thanks. In this video, we'll show you how to remove and reinstall a driver side power mirror which is basically the same procedure for the passenger side. This is for a 2003 Saturn Ion, same as any '03 to '07. Only tools you'll need are a flat blade screwdriver and a 10mm socket with a ratchet and extension. Also, a 10mm wrench would work.
Okay, to remove your mirror, you can just pull this panel off by hand or use a screwdriver carefully. It pops off. Right behind here, your mirror is connected. There's a little tab. Pull back on the tab. Disconnect the harness. Then there's three 10mm bolts. One here, then two here. There's your mirror out. Okay, our original is obviously in fine shape. Just doing this video to kind of show you. We'll reinstall it. Put the harness through first. Make sure it goes in place correctly. Okay, start these bolts. Be careful not to drop this one. Reconnect your harness. Make sure to put the insulation back in. Put the trim panel back on.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality auto replacement parts and the bets service on the internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the internet and in person.
