Replaces
Part Details
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Product Features
TRQ suspension kits are manufactured using premium raw materials and coatings for extended service life. Each TRQ suspension component is designed to be a direct, maintenance-free replacement to the stock unit. To extend the life of your steering and suspension components, TRQ recommends replacing components in pairs, sets, or kits. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Install Tip: When replacing steering components, have a professional alignment performed afterwards. This ensures proper tracking and even tire wear.
Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
PSA30039
Bought to replace bent front control arm- and everything else was rusted and unmovable. So, a full new setup made sense- as did the value pricing. All part lined up, and after an alignment, I'm back to trudging through an epic snowstorm and atmospheric rover in Juneau, AK. Torque spec sheet might be nice, so I don't have to track down a copy of the FSM.
The package was received in great condition, and contained all the parts noted in the photo. What is not mentioned or shown is that the ball joints and rear mount brackets are not tightened, which allows for much easier installation. I had not purchased loaded control arms before, but these were a breeze to install. A little note, there is a cotter pin that is packaged with the lower control arms. One was inside the arm, and the other was free in the bag. It would be easy to lose these if you weren't expecting them to be free in the package. There was some tape on the control arm, and maybe this was to hold the pin, but, it didn't work.
So far so good. Great price. All clunks went away.
The kit worked perfectly, no issues at all
Excelente
No, this kit will not fit a 2006 Subaru Forester. We have kits for your vehicle in the link below. <a href="https://www.1aauto.com/2006-subaru-forester-brake-steering-suspension-kits/y-mo-c/2006-783-377" target="_blank">https://www.1aauto.com/2006-subaru-forester-brake-steering-suspension-kits/y-mo-c/2006-783-377</a> Please be sure to check the 'Vehicle Fit' tab on the listing.
