Replaces
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com. Your source for quality replacement parts and the best service on the Internet. Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing or maintaining your vehicle. I'm going to use my 20 plus years experience restoring and repairing cars and trucks like this to show you the correct way to consult parts from 1AAuto.com.The right parts installed correctly, that's going to save you time and money. Thank you and enjoy the video.
In this video, we'll be showing you tail light room replacement on this 2003 Dodge Neon same as any 2005 Dodge or Plymouth Neon. The only tools you'll need are a pair of pliers and a 13 millimeter wrench. Okay, so we're going to start in the trunk here, the tripod and first we got to do is we remove this little trim tab or kind of hole in the band. Just kind of work your pliers underneath. Give it a good pull. Okay. It comes out and then you pull this back and you've got three 13 millimeter bolts here, 13 millimeter wrench or a good pair of pliers will do it. I'm going to use an air ratchet just to go fast.
Now, if you're looking just to replace the bulbs, you don't have to take those bolts off. Maybe just twist the bulbs out, pull them off. I'll just keep them done and then this upper one is your backup light, twist it out, okay. You can do that if you damaged your tail light. And it got all that's to it. Okay, put your new one back in. Now this, you don't have any reason to be, you know that car with the red tape on the tail light. It's easy enough to buy these tapes from 1A Auto and easy enough to put it back in. Put these nuts back on. Okay, I'm going to use my air ratchet. I'm going to do the final tightening by hand so I don't get it too tight. I'm going to put the parking light and then your bulb, turn. Then put back my trim. This should go under this piece here. Then press this one back in.
Brought to you by www.1AAuto.com. Your source for quality replacement parts and the best service on the Internet. Feel free to call us toll-free 888-844-3393. The company that's here for you on the Internet and in person. Thank you.
CS140-U000R
