About TRQ: TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Install Tip: Keep & reuse your original hardware, new hardware is not included with this item.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
This part fits
4 vehicles spanning 2002-2005.
Fits these Makes
Select vehicle
Year
Make
Model
Description
2002-2005
Ford
Explorer
Ford Explorer Driver Side Hood Lift Support TRQ GSA45947
2002-2005
Ford
Explorer
Ford Explorer Passenger Side Hood Lift Support TRQ GSA45947
2002-2005
Mercury
Mountaineer
Mercury Mountaineer Driver Side Hood Lift Support TRQ GSA45947
2002-2005
Mercury
Mountaineer
Mercury Mountaineer Passenger Side Hood Lift Support TRQ GSA45947
Part Interchange
Brand Label
Part Number
DIY Solutions
BHS00074
TRQ
GSA45947
Tuff Support
613793
Ford
5B-025469
Ford
5B025469
This item may be interchangeable with parts from other brands with the above part numbers.
This information is provided only for reference and does not guarantee that the item you are
purchasing is identical to parts with part numbers from the brands listed above.
To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Hood Lift Support 2002-05 Mercury Mountaineer
Created on:
Tools used
Flat Blade Screwdriver
Assistant
Block of Wood
1. Removing the Hood Support
Support the hood with a piece of wood or have an assistant support the hood
Pry off the clip at the top of the hood support with a flat blade screwdriver
Pull off the top of the hood support
Pry off the clip at the bottom of the hood support with a flat blade screwdriver
Pull off the bottom of the hood support
2. Installing the New Hood Support
Push the bottom of the hood strut into place
Push the top of the hood strut into place
Test the hood supports by closing and opening the hood
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the hood support struts. The procedure is the same for any 2002 to 2005 Mountaineer as well as the Ford Explorer. You'll need new hood support struts from 1AAuto.com and a small flat blade screwdriver.
You can see, when we lift our hood, it just falls right back down again. This is a sign that your hood supports have gone bad. You want something or someone to support the hood while you do this procedure. We're going to use this block of wood. To remove these supports just take a flat blade screwdriver. Pry out on this clip. Then pull the piston from the stud. Then do the same thing down here. It pulls free. We're going to replace both of our hood supports. We'll just fast forward as Mike removes the other one.
Up top are the old hood supports. Below are the new ones from 1A Auto. You can see they're identical and they'll fit exactly the same. Now, to replace your hood support pistons, just push them onto the studs. You may need to lift the hood a little bit to get it to go onto the stud. Then we'll just repeat that process over here. Do the same thing: just push it onto the studs. Now you no longer have to support your hood. You just test it out. Close it. Open it back up. It should practically open itself. You're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Product Reviews
There are no reviews for this product yet.
GSA45947
In Stock
Customer Q&A
Got a question about this part? Post it and get answers from our team.
No questions have been answered for this product yet.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Ask a Question
Check Your Email
We sent a verification email to .
Click the Verify Email button in the email to submit your question.
This extra step helps prevent spam.
Select Your Vehicle
Specify your vehicle's year, make and model to guarantee fit.