★★★★★
April 22, 2022
Right parts for the right job. Thx
Replaces
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Product Features
TRQ fully loaded shocks and struts are manufactured using premium raw materials and calibrated to restore original ride comfort. TRQ shocks are fully loaded featuring a pre-loaded bearing plate, upper and lower spring isolator, upper spring seat, coil spring, boot kit, and premium strut. TRQ recommends replacing your shocks or struts in pairs to ensure even wear of components and improved ride comfort. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Replacing struts used to require specialized tools to compress, remove, and transfer the old spring and mount. Our Pre-assembled, complete strut & spring assemblies come with all new parts and make the job much quicker and easier for the do-it-yourself mechanic.
Strut & spring assembly contains:
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This part fits 5 vehicles spanning 2002-2003.
| Year | Make | Model | Description |
|---|---|---|---|
| 2002-2003 | Ford | Explorer | Ford Explorer Eddie Bauer Front & Rear 4 Piece Shock & Spring Assembly Set TRQ SCA61071 |
| 2002-2003 | Ford | Explorer | Ford Explorer Limited Front & Rear 4 Piece Shock & Spring Assembly Set TRQ SCA61071 |
| 2002-2003 | Ford | Explorer | Ford Explorer XLS Front & Rear 4 Piece Shock & Spring Assembly Set TRQ SCA61071 |
| 2002-2003 | Ford | Explorer | Ford Explorer XLT Front & Rear 4 Piece Shock & Spring Assembly Set TRQ SCA61071 |
| 2002-2003 | Mercury | Mountaineer | Mercury Mountaineer Front & Rear 4 Piece Shock & Spring Assembly Set TRQ SCA61071 |
| Brand Label | Part Number |
|---|---|
| KYB | SR4051 |
| Monroe Shocks & Struts | 171322 |
| Monroe Shocks & Struts | 171321 |
| Monroe Shocks & Struts | 181321 |
| Monroe Shocks & Struts | 181322 |
| Gabriel | G57018 |
| Unity Automotive | 11160 |
| Unity Automotive | 15060 |
| Gabriel | G57017 |
| Ford | SR4081 |
| Hollander | 527-01513 |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the struts on this 2003 Mercury Mountaneer. We show you the passenger side. The driver side is a similar procedure. There is just one little different thing that you have to remove to get to the bolts. This Mountaineer is basically the same as all Explorer, Ford Explorer, and Lincoln Aviator. You'll need new front struts from 1AAuto.com; 8, 13, 19, and 24 millimeter sockets with ratchet and a piece of pipe for some extra leverage; pry bar; jack and jack stands; and a torque wrench.
Pry off the hubcap by using a flat blade screwdriver in the small slot on the side. Once you get it started, you can just pull off around the edges. We'll just fast forward as Mike removes those 19 millimeter lug nuts. If you don't have air powered tools, you want to loosen them while the vehicle's on the ground, raise the vehicle and remove them the rest of the way. Now you can pull the wheel free.
At the top of your strut, are three 13 millimeter nuts. Coat the top of those with some penetrating oil. That little valve in the top of the picture is in the way, so use an 8 millimeter socket and ratchet and remove the bolt for it, so it can move around. Then, use a 13 millimeter socket and ratchet with extensions or, if you have them, use air powered tools and remove those three nuts that hold the top of the strut.
You want to remove this bolt right here, so just spray the nut on the back first with some penetrating fluid, and then, using a 24 millimeter socket and ratchet and a piece of pipe for some extra leverage, just loosen that up and remove it. Use a pry bar to pry the strut down and pull it forward and then up and out.
On the bottom, is the old strut. Above it, is the new one from 1A Auto. You can see, they're very similar and they'll fit exactly the same and work just the same. Take your new strut from 1A Auto and feed it back into the lower control arm and angle it up. Then, just push those studs back up into place and replace those nuts. After you get them all replaced by hand, you just want to tighten them up preliminarily.
Then, remove this nut. Lower the wheel knuckle, so that you can get that bolt in the strut and then just push the bolt in and hammer it in the rest of the way. Put the nut on the other side and lock it into place. Then, tighten up that bolt the rest of the way.
Now, in order to tighten up that bottom nut, you want to simulate like the weight is on the suspension, so jack the suspension up and take the weight off the jack stand. Then, you'll want to torque that nut to 130 foot-pounds.
Replace your wheel and then replace the lug nuts and tighten them in a crossing pattern. You just want to tighten them most of the way, lower the vehicle and then tighten them the rest of the way. Torque the lug nuts in a crossing pattern to 100 foot-pounds. Line up your hubcap and hit it back into place. Then, torque these three nuts at the top of the strut to 30 foot pounds. Replace the 8 millimeter bolt that holds that bracket and valve in place and tighten it up.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the rear strut on this 2003 Mercury Mountaineer. We show you on the passenger's side but the driver's side is the same procedure. The items you'll need for are a new rear strut from 1AAuto.com, a 13 through 21mm socket and ratchet, piece of pipe for some extra leverage, flat blade screwdriver, a pry bar, jack and jack stands and torque wrench.
Start off by prying off your hub cap. Then remove these 19mm lug nuts and if you don't have air powered tools, you want to loosen them up while the vehicle's on the ground, raise the vehicle and remove them the rest of the way. Now just pull the wheel free.
Now, you want to remove these three nuts at the top of your strut. Just spray them with some penetrating oil and let them sit and then also spray the bolt at the bottom of our strut and let that sit. On our vehicle, I believe these were originally 13mm and they had actually rusted down so that a 1/2 inch wrench actually worked best. You can see I put the wrench onto one of the nuts and then I hook another wrench in that gives me some leverage and I can get the nut going. Like I said, it was kind of a process, I got the 13mm wrench on there first, realized that there was some flaky rust, so then I went to the 1/2 inch wrench and that went on. The other thing is a lot of times, one of them broke off which was fine. Actually, it sped the process up but another one of them I had to just loosen and then tighten a few times and spray it with penetrating oil before it came off.
To get to one of the bolts, you'll have to move the shield. To do that, you just pry out these clips and then remove the four clips down the side. To do that you just twist out the center with a Phillips screwdriver and then pull the clip out. If yours are broken or have sand in them and they won't come out, then just pry out, put some wire cutters in there and just clip the tops off. Once you've gotten all of them, just pry out and pull that panel free. Now you can access that back nut.
Now, remove this 21mm bolt, using your socket and ratchet and a piece of pipe for some extra leverage. Once you get it out to this point, you should be able to just pull it free.
Start off using some penetrating oil and coat that. The bolt for the stabilizer link is from down here and it's a 16mm. It's always really good if you can put your wrench on it and turn it. What this means . actually there's two really good things going on here, you can see I'm turning it and that nut is not moving. The other thing is you're turning it and this plastic isn't moving. Sometimes the hardest part is getting this whole shaft out of the plastic. If you can't turn it or it tends to turn the plastic as well, what you can do is use a hammer and a chisel and break away all the plastic when you get to that point. As you can see, I was able to turn it with a 16mm. This nut on the original is a 15mm, I'm just going to remove this nut. We'll just fast forward as Mike removes that nut. Once you remove the nut, it should just pull out but if the bar still won't pull out from the bottom, just lock onto the plastic with some locking pliers and use a 16mm socket and ratchet and try and get it out that way. If it still only goes so far, you can use a hammer and a punch and just knock it out the rest of the way that way. Once you pull it out the plastic part will just lift up and out.
You need to remove the bolt that holds the outer, lower control arm. That nut is 21mm and the other end of the bolt is 18mm, so I use a socket and ratchet with a pipe for some extra leverage to get it loose. Then, hold the bolt end with an 18mm wrench and remove the nut the rest of the way.
Now you just need to loosen the two bolts that hold the control arm to the body or the frame. There's one there, they're 21mm nuts. There's 18mm heads on the bolts, but they actually have tabs on them to hold them in place. Use a 21mm socket and ratchet and a pipe for some extra leverage and just loosen those up a couple of turns. Once those are loosened, you can pull your lower control arm down and lift up on your wheel knuckle. Then you can lift your strut up and out.
On the bottom, is the old strut. Above it, is the new one from 1A Auto. You can see they're identical and they'll fit exactly the same. Make sure you have the lower part of the strut lined up so that the mount, obviously, goes front to back, so that the bolt will go in and then feed the top up and in, just look up and in until you get those three studs lined up. Once you get them lined, push it up in there and start the three nuts on to hold it.
You may need to turn the bottom of the strut just a little bit to make sure it lines up well. You shouldn't have to turn it much, just adjust it a little bit so the bolt will go in easily. Once you get it lined up, just lift the lower control arm into place and then push your bolt back through the strut. Then, put your other bolt back in right here on the wheel knuckle, just hammer that in and then hammer this bolt in just a little bit. You want it to be about that distance right there, put the nut on the other side and then just tighten that bolt into the nut. Then put the nut onto this bolt and then we'll fast forward as Mike tightens both of those up.
Then just tighten up those three nuts at the top of the strut. You want to tighten these up between 20 and 25 foot pounds which is just good and tight with a small wrench. Now take your sway bar and load it up with a washer, then a bushing, then your lower control arm. When it goes through, add a bushing, then a washer and then that tube and then another washer and another bushing. Then your sway bar, just push it up through the sway bar and then another bushing and a washer and then that nut. Now just tighten that up.
To tighten up the suspension parts, you want to simulate it as if your car was in the level riding position. You can see I'm jacking it up off of the lift with the jack and now I'm tightening up the sway bar link. You tighten it up until the bushings are basically squeezed down and they're about the same diameter as the washers. Again, with the weight of the vehicle on the suspension, tighten up the three nuts that go into the bolts, there's the two that go to the control arm to body and the one into the control arm to the knuckle. Those all tighten to 110 foot-pounds.
Now take this panel and feed it back in underneath, get the holes lined up, and then push these clips back into place. Then, for these four clips, you just push in the lower part of the clip, and then push the center in to lock them.
Now replace the wheel and then replace the lug nuts. We'll fast forward as Mike tightens those up. You want to tighten them while the vehicle's in the air just preliminarily and then lower the vehicle and tighten them the rest of the way. Then you want to torque each of these to 100 foot-pounds in a crossing pattern. Then take your hub cap, line it up and hit it back into place.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Right parts for the right job. Thx
all good
I received the product on time undamaged and an exact match to the Mountaineer.i was able to install the product hassle free. the ride is much improved. I recommend.1aauto to anyone
The parts were direct replacements. They arrived fast and we'll packaged. They were of good quality and well manufactured. Will definitely be using 1aauto again and again!
I am happy with US one as usual everything went well the installation the use of your video end result was a complete installation with nothing going wrong. The only thing couldve been better you offered a discount on a better quality set of struts after the job was done. I probably wouldve went with the better struts if I knew that in the first place
The ride quality is superb can't be happier with the price and again with the quality! My wife and I did the fronts and took it in to a local shop and had them do the rears. We still save almost over $750 Thanks 1AAuto
I like them all and all. My truck has been great. Thanks for the speedy delivery.
Well the coil springs are too long and there is no air between the coils which gives the vehicle no bounce at all. I ordered front and rear and it looks like they put the rear spring on the front which is longer. I complained to 1a and they sent me the same front struts again. I had to take them apart and use my old springs which defeated the purpose of buying loaded struts.... I new better than buying cheep parts. If you don't pay 100$ a piece hour backing up. Why put Chinese parts on a ford. Mike Jones
The product is good. I have been ordering from here for a while now. But, this last order got screwed up. Waiting for parts cause they forgot to pull them. ?? Next day delivery? Took over a week for mine. I asked why they forgot to pull the product. Answer..... you had a large order. Are you kidding me? You didn't just say that. Idk if I will continue to order.
SCA61071
No, these are meant to be used to factory height and are not adjustable.
1A TECH GUY KNOWS HIS STUFF
I got no perceptible lift after installation, nor did I expect any. I would guess if you have a broken spring you may notice some lift where that spring has broken. My reason for replacement was due to leaking shocks. This complete strut made for a quicker and cleaner install. My son and I installed all 4 in about 4 hours using a lift. Neither of us had done this job before. Some delays were being cautious and double checking torque values etc. Car rides nice now.
