★★★★★
November 11, 2024
Great fit. Just what I expected.
Replaces
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the transmission mounts. This is a 2003 Honda Civic, and this is basically the same for any 2001 to 2001 Civic with the 1.7-liter. Items you need are new a transmission mount from 1AAuto.com, 10 to 15mm sockets with ratchet extensions, 15 to 17mm wrenches, jack and jack stands, penetrating oil, and a torque wrench.
When jacking up the motor and transmission, you want to use a piece of wood, so you don't risk breaking the transmission casing or the oil pan. Just going to put a little bit of pressure on the bottom of the transmission, so it stays in place when we undo the mount. If you have a factory air cleaner setup, you'll have to remove that.
In this case, the vehicle came with an aftermarket intake. We're going to remove the aftermarket intake with this 10mm bolt, undoing this hose clamp, disconnecting this sensor. We're going to put some penetrating oil on the six bolts for the transmission now. You have the two for the bracket to the actual transmission, one bolt going from the bracket through the actual rubber mount, and then one, two, three bolts mounting the rubber mount to the body.
When removing the bolt from the transmission bracket through the rubber mount, you'll need to use a wrench or a low profile ratchet so that you don't come in contact with this bracket on the transmission. Even though the bolt's unthreaded, sometimes they can get stuck to the lever inside of the mount, so we're going to take two wrenches, in this case, the 17mm and the 15mm, that fit over the shaft of the bolt and behind the head, so we can pry it out.
Now we're going to loosen the bolts on the transmission bracket to get enough clearance to remove the rest of our mount bolt. We're going to remove these two 10mm bolts. With this bolt removed, we'll remove this stop from the motor mount, take our transmission bracket out of the way, and set it aside to access the three 17mm bolts on the rubber mount.
With the mount out of the vehicle, you can inspect it. What happens a lot on the mounts is the rubber inside tears, and you can actually see that our mount is in good shape so we're not one to waste the new part so we're going to reinstall the original one.
Here is the original one out of the vehicle. If you did knew a new one from 1AAuto, you can see it's a direct fit, all the same mounting points. It's going to go in, bolt in just like the original.
Reinstall the three bolts that attach the transmission mount to the body. We're going to take some penetrating oil and spray it into the rubber mount to make sure our bolt goes through smoothly. Then we'll take our transmission bracket and install it over the studs on the transmission.
Before fastening the transmission bracket, we're going to put the bolt through the mount and start the first couple of threads, and you're tight. So, now we're going to bring up the transmission with our floor jack until it touches the bottom of the transmission bracket. Install the fasteners onto the transmission bracket, bring them down tight. So, again, ensure that your fasteners are nice and tight by hand.
Now we're going to bring the transmission mount bolt down nice and tight by hand. If you can get a torque wrench on, the torque spec is 40 foot-pounds, but we're just going to get it nice and tight by hand. Going to torque transmission bracket bolts to 40 foot-pounds.
Now we'll install this brace with two 10mm bolts. Now we're going to reinstall our aftermarket air intake or, in your case, it could be the OEM air box and intake setup, in the reverse order we removed it.
Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also check out our other helpful how-to and diagnosis videos.
MTA70734
Great fit. Just what I expected.
fit well and works
good fitment and will purchase more in the future installed for my 2003 civic dx
I purchase the transmission mount for 2001 Honda Civic. The parts showed up on time and installed it the same day. The job took about 1 hour to install. I really would buy from 1A again. Thanks Calvin
Please confirm the year make model and engine size so we can verify fitment, thank you!
This is correct for the 2001-2005 Honda Civic 1.7L with a manual transmission.
Thank you for your inquiry! This mount will be built to your vehicle's exact OEM specifications and will fit and function the same as the original and should get rid of any engine vibration. Please let us know if you have any other questions.
