Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
How to Replace Tail Lights 2000-05 Chevy Monte Carlo
Created on:
Tools used
No Tools Needed
1. Remove the tail light
Pop the trunk.
Unscrew the two thumb screws to move the upholstery out of the way.
Remove two more thumb screws.
Pull the light out, twist out the bulbs and unplug the wiring harness.
2. Install the new tail light
Transfer the wiring to the new tail light.
Twist in the bulbs.
Plug in the wiring harness and put the tail light into place.
Secure with thumb screws.
Replace the upholstery, and secure with the remaining thumb screws.
Brought to you by 1AAuto.com, your source for quality auto replacement parts and the bets service on the internet. Hi, I'm Mike Green. I'm one of the owners of 1AAuto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20 plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly, that's going to save you time and money. Thank you and enjoy the video.
In this video, we're going to show you taillight replacement and servicing on this '03 Monte Carlo SS, same as any 2000 and 2005 Monte Carlo SS. No tools are required.
Taillight replacement, you're going to want to start by opening up the trunk. Inside the trunk, if you have one of these cargo nets, we'll take it off. Then you undo this top screw that actually is holding the light. Okay. It's a hand screw. You should be able to do it by hand. Then you kind of reach up and pull your trunk felt down and then there's two more thumb screws down here. Then you can pull your light out. The light comes out. If you're looking to replace bulbs, you can just twist and the bulbs come out. Just pull out those socket. Push them back in and twist. Side marker twists out. To replace that, on top of the same thing, just twist.
If you need to replace the whole assembly, here's a little thumb tab right here. Pull that. Pull that off. Just kind of wrap it around this post here and now your whole assembly is out.This is my original. This is my new one from 1A Auto. You can see the new one is going to be all the same. On the back side, just have these protectors but the mounting points are all the same. You will need to transfer over your harness. Okay. That's pretty self-explanatory. There's a little clip that holds it on here.
Basically, like I said, just twist all the bulbs out and then you put it onto the new one. Our new one comes with the gaskets on the studs as well as gasket for the body so it will go right in. Okay. I'm actually going to install the original ones in this car because there's nothing wrong with it. I just want to let you know, show you that 1A's are just the same as the original and it's going to go in especially if you've got a broken one. Obviously it's going to fix your problem. As these cars gets older and the taillights gets scratched up, the new ones are a nice fresh addition to them.
Reinstallation, plug the harness back in. Make sure all your lights are nice and tight. Okay. Line up your lower hole then your upper holes. Make sure as you push in this plastic is on the inside here. Push it in. Your two smaller ones are your lower ones. Tighten them up nice and snug with your hand. Push your trunk trim back in place. Top it on. Again, nice and snug. Obviously you want to make sure this is the one that your cargo net hooks to. Put the cargo net back up and you're all set.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality auto replacement parts and the bets service on the internet. Please feel free to call us toll-free, 888-844-3393. We're the company that serve you on the internet and in person.
1ALTP00235
In Stock
Product Reviews
Loading reviews
4.86/ 5.07
7 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
1
0
0
0
As advertised
CHARLES
February 13, 2019
No issues fit like OEM. Easy to install New tailights in 15 minutes
Site Reliability and Fair Cost
Frank
July 22, 2019
1AAuto is a great site for learning how to repair your vehicle!
As for shopping for parts on a reliable Web Site I'd give them a 4 star review. Pricing for what I purchased was fair to adequate, with the shopping around I did.
The ordering process was simple and the follow up and delivery went well.
Tail Lights for Monte Carlo
H
August 24, 2019
The tail lights fit perfect and look great, highly recommend!
Quality lamp assm
Shane
May 16, 2020
Replacement lamps are equal quality to stock assm. Look great,and have lifetime warranty.
~ EXCELLENT Replacement ~
Rob
April 29, 2022
It has been well over a year since the easy install of these rear light covers on our 2003 Monte Carlo SS - AND THEY STILL LOOK PERFECT!!
Thank You 1A Auto!!
Great tailights
John
June 28, 2023
Persect fit and top quality just like factory lights. They Don get better than these lights!
Tail lights
Mark
May 23, 2024
Great results and response.
Customer Q&A
What brand of manufacturer? Where is product made?August 3, 2019
H D
10
1A Auto's house brand parts are manufactured by various overseas aftermarket companies specifically for us and built to your vehicle's exact OEM specifications. Please let us know if you have any other questions. Thank you!
August 4, 2019
Andra M
Does this include the bulb sockets as well or no?January 17, 2021
Robert L
10
No, you use the existing bulb harness.They are just the lenses.
January 17, 2021
Joseph C
Does it come with the wiring and sockets for the assembly?January 17, 2021
Robert L
Does it come with the wiring and sockets for the assembly?January 17, 2021
Robert L
10
These tail light assemblies do not come with the wiring or sockets. You will have to reuse your originals.
January 18, 2021
T I
Does it come with the wiring and sockets for the assembly?January 17, 2021
Robert L
10
The wiring and sockets will not be included with this assembly.
January 18, 2021
Emma F
Where can I find the thumb screws that hold the tail lights in place?March 10, 2024
Roland C
10
Currently, we do not carry this part for your vehicle. We're always updating our inventory so please check back soon!
March 12, 2024
Jean O
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.