Replaces
Frequently bought together
Part Details
Specifications
Returns: Parts with electrical components cannot be returned once installed.
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How To Replace Power Window Switch 2000-05 Buick LeSabre
Created on: 2011-06-10
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the master power window switch, the driver's switch on this '03 Buick Lesabre. It's the same as most 2000 to 2005. The only tool you'll need is a flat blade screwdriver.
For the power window master switch, you want to gently pry up on the front here. It comes up and slides forward and out. Then there's a little push right here. Disconnect.
This one's working fine in this vehicle, so reconnect, push the back in first, and lock it down in place.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we show you how to remove and reinstall the front master power window switch on this 2000 Buick LeSabre. It's a pretty easy operation. The only tool you'll need is a flat blade screwdriver.
If the power windows in your vehicle are acting up, a lot of times what happens is the lock mechanisms in these switches get messed up. What will happen is the windows will work from this switch, but not the other switches. Obviously, you want to make sure that your lock button hasn't been pressed. Usually, if the windows work from this switch, but not the other switches, it's because this lock mechanism has shorted out.
Getting this out of here is pretty easy. Pry up nice and gentle on the front. Get it up and out, slide it forward and then reach right underneath to the little tab. Press it with your thumb, disconnect. My original's working fine, but your new one you just plug it in. Put it down and in, and slide the back in first, and then press the front down in.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
DWS-198
