★★★★★
March 7, 2024
great fit, just like original,excellent product!!!!
Replaces
Replaces Chevrolet Buick Front & Rear 16 Piece Steering, Suspension, & Drivetrain Kit TRQ PSA59133
$494.95
Replaces Chevrolet Buick Front & Rear 8 Piece Suspension Kit TRQ PSA85359
$449.95
Replaces Chevrolet Impala Olds Intrigue Front & Rear 4 Piece Strut & Spring Assembly Set TRQ SCA57015
$449.95
Replaces Chevrolet Impala Olds Intrigue Front & Rear 8 Piece Suspension Kit TRQ SCA67070
$448.95
Replaces Chevrolet Buick Front & Rear 4 Piece Strut & Spring Assembly Set TRQ SCA57204
$401.95
Replaces Chevrolet Buick Pontiac Olds Front 6 Piece Drivetrain Kit TRQ PSA77580
$389.95
Replaces Chevrolet Buick Front 12 Piece Steering & Suspension Kit TRQ PSA31181
$369.95
Replaces Chevrolet Buick Pontiac Front 6 Piece Drivetrain Kit TRQ PSA78543
$351.95
Replaces Chevrolet Buick Front 8 Piece Steering & Suspension Kit TRQ PSA32892
$344.95
Part Details
Specifications
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Returns: Parts with electrical components cannot be returned once installed.
Attention California Customers:
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
This part fits 2 vehicles spanning 2000-2003.
| Year | Make | Model | Description |
|---|---|---|---|
| 2000-2003 | Chevrolet | Impala | Chevrolet Impala with Standard Cooling Dual Radiator & Condenser Fan Assembly TRQ RFA83314 |
| 2000-2003 | Chevrolet | Monte Carlo | Chevrolet Monte Carlo Dual Radiator & Condenser Fan Assembly TRQ RFA83314 |
| Brand Label | Part Number |
|---|---|
| Chevrolet | 19130419 |
| Chevrolet | 10419167 |
| Dorman | 620-616 |
| Partslink Numbering System | GM3115122 |
| Partslink Numbering System | GM3117104 |
| Dorman - OE Solutions | 620-616 |
| Hollander | 674-00818A |
| General Motors | 89022512 |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the radiator cooling fan on this 2003 Chevy Monte Carlo. It's the same part and similar process on these Monte Carlos from 2000 to 2003. The items you'll need include a new radiator cooling fan from 1AAuto.com, an 8mm, a 10mm, and a 13mm socket and ratchet, a flat blade screw driver, a pair of pliers, and some wire cutters.
Start off by removing these eight 13mm bolts, and then loosen this 13mm bolt right up here. We'll fast-forward as Mike does that. Push the support bar to the side, and then lift up these two mounts. Lift up on the tab, disconnect the harness to your mass airflow sensor, and then loosen up these two hose clamps with a flat blade screw driver. Then pull the hose free. Then loosen up these two 8mm bolts. Pull the air intake box forward, then up, and then out. Then pull the back part of the intake out so that you can access this 10mm bolt right here. There's another one in the same spot on the other side right here. We'll just fast-forward as Mike removes those.
Now remove this 10mm bolt and this one here on the other side. When you remove those bolts, you can pull those mounts up and off. Now pull back on the tab and disconnect the harness to your cooling fan. You do the same thing to the other harness. Then unclip the series of harness clips. To unclip them, you just use a flat blade screwdriver and just pry them apart. Using your wire cutters, cut this wire tie and pull this hose free. Then, using pliers, push the teeth on this hose clip together, and then pull the hose free. Then tuck it back behind your engine mount. Pull this out of the way and then lift your radiator cooling fan up and out.
On the bottom is the old radiator cooling fan, and you can see it's been modified because one of the fans died on it. It was replaced, and wires had to be spliced into the harness. Our radiator fan just has connectors, so they'll fit in just like the old one. Take your new radiator fan from 1A Auto and line up these two tabs into these two slots down here. Just lower the fan down into place. Then replace these mounts and the 10mm bolts that hold them on.
One problem you may run into: our clip, here, won't stay in place, so, basically, what I do, is put the bracket in. Then I can use the bolt, get it into the clip, slide the clip up, and then start the bolt into it. Just pull on it make sure it's seated well. These bolts go into a clip that's clipped onto the radiator. This one fell off, so I just retrieved it from the ground, and now you just want to clip it right back on. We'll fast-forward as Mike tightens up those two 10mm bolts. We'll fast-forward as Mike replaces and tightens up those two lower 10mm bolts. Push the tabs on the back of these clips on your old radiator fan and remove them. Then push them into place on your new radiator fan.
Now, re-clip the harness that lines the bottom of the fan to those clips that you just put back into your new radiator fan. We'll fast-forward as Mike does this. Now, put the outer part of your air box back in place. It has pins on the bottom that line up with rubber grommets. Push it down into those rubber grommets, put the larger wire clip back in place, and clip the larger harness back into place.
Now, reconnect your two harnesses. Push the teeth together on this hose clamp on your radiator hose and push the hose back into place. Then remove your mass airflow sensor, this small ring off of the sensor, and push the ring onto your intake box. You want the tab to go in between those two posts on the box.
Then take your mass airflow sensor, push it back into the intake hose, and then lower the air intake box and attach it back to the sensor. Then line it up. Then tighten up those two hose clamps, reconnect your mass airflow sensor harness, line up the air intake box, and tighten up those two 8mm bolts.
Pull the mounts back down, and then pull the engine forward so that they re-clip. Replace those six 13mm bolts, put your brace back in place, and replace those two 13mm bolts, and tighten up the 13mm bolt at the top. Reconnect this hose. Just rewire tie it and clip off the excess. Then you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
great fit, just like original,excellent product!!!!
Perfect fit, installation video was helpful, particularly the need to remove airbox for clearance to remove/install.
I watched your video on fan replacement. It was very easy because the video explained what I need. Thank You Joseph S Pena
The dual cooling fan assembly I purchased works perfect. It was easy to install and came with everything I needed. Thanks 1A Auto, you always have the quality parts at a great rate.
Fit like the old one. The only problem that I had was I watched your how to replace video and it did not show removing the plastic pin on the bottom, other then that went real well
My fan motors started squealing on my 2002 Chevy Monte Carlo, so I checked on line how to change them, 1A Auto has the Best Videos, very detailed, & at the end you can order the part you need at a Very Completive Price. We they came the fit like a glove, just like factory fit. Clint Wildman, Billings, Montana
Great product and service----Great How To Videos. Will use again.
Arrived in good condition and on time! Fan works great!
Perfect fit, best price of them ALL ! I've been using 1A Auto a lot lately, and finding their quality is GREAT and their prices are better than the 3 local (nat'l chain) parts stores. I will continue to use them, and recommend them. Mike S. Grand Junction, Co.
The part arrived in good condition and on time which was expected I will do all of my business through 1uto!
3.8 engines tend to leak at the water pump or at the 2 elbows just above there. Any repair should also include replacing the thermostat while you making repairs. Coolant system needs to be bled to remove any air. You will be wise to check a few toutube videos and invest in a repair manual.
