Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
How to Replace Headlights 2000-01 Nissan Maxima
Created on:
Tools used
10mm Wrench
10mm Socket
Ratchet
1. Remove the headlight assembly
Unbolt the two 10 mm bolts at the top of the headlight.
Remove the headlight assembly and unplug the bulbs.
2. Install headlight assembly
Plug the bulbs and harness into the new headlight assembly
Bolt in the two 10mm bolts using your 10 mm socket and ratchet or wrench.
This video is brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.
Hi. I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20 plus years' experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly, that's going to save you time and money. Thank you and enjoy the video.
In this video, we'll be replacing the headlight on 2001 Nissan Maxima. The procedure is basically the same for any 2000 to 2003, although the '02 and '03s did have the HID headlights. Tools you'll need are just a 10 millimeter wrench. Obviously, you may need the replacement headlight bulb or a headlight that was damaged in a slight accident, but you also might want to freshen the appearance of your Maxima. If you look on the right side, the driver's headlight, and now both headlights, you can see how much fresher that your Maxima can look with the new pair of headlights. There's the old. There's the new. One more time, the old, and the new. This car is 150,000 miles. Just with the new headlights, we took about 100,000 miles off of it.
We're moving the headlights. Obviously open the hood and then you have two 10 millimeter bolt right on top. I'm going to use my air ratchet real quick to remove those. Okay. Again, just two 10 millimeters bolts. You can use a wrench or a socket and ratchet. Then the headlight is clipped under here and on the side. What you want to do is you want to pull this out first and then basically just kind of grab hold of it on this side and give it a good pull and it comes up and out. It kind of is getting caught right here a little bit, so I'm going to try and get this here. I'm going to get this first. Once it's pulled out, I'm reaching behind and twist to get the signal out. Then you'll probably want to screwdriver the headlight and you could just kind of get in behind the connector here and pop it off. This is how your headlight comes right out.
You can see here I've got my new headlight from 1A Auto here and here's the old one. You could really see the difference and the clarity and everything, but the new headlight from 1A Auto, everything is just like the original. It's got the tab here just like the original. It has the clip on the bottom. It's hard to see that right here. Everything is going to go in just like the original. Now to install the new headlamp, first you've got to remove this little protector. Put in the signal light. Put those in and twist. I'll make sure I get it lined up correctly here and twist. Plug in the headlight. We're going to put the inside in first here. We're going to slide it in here first and then we're going to push on it and get this pin inside the fender. Get that inside the fender, push down. It all goes into place. Clip that in to place here and then that goes into place there. We'll tighten up our two 10 millimeter bolts and we're all set.
Now we're tightening these with a hand tool. Tighten them up finally with a hand tool to make sure they're right. Our light's in and tight. We're just going to do a quick test here. Everything seems to be working correctly.
This video is brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Feel free to call us toll free 888-844-3393. The company that's here for you on the internet and in person. Thank you.
DS494-B001L
In Stock
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Nissan is a registered trademark of Nissan Motor Co., Ltd. 1A Auto is not affiliated with or sponsored by Nissan or Nissan Motor Co., Ltd.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.