Replaces
Part Details
Specifications
Product Features
TRQ fully loaded shocks and struts are manufactured using premium raw materials and calibrated to restore original ride comfort. TRQ shocks are fully loaded featuring a pre-loaded bearing plate, upper and lower spring isolator, upper spring seat, coil spring, boot kit, and premium strut. TRQ recommends replacing your shocks or struts in pairs to ensure even wear of components and improved ride comfort. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Replacing struts used to require specialized tools to compress, remove, and transfer the old spring and mount. Our Pre-assembled, complete strut & spring assemblies come with all new parts and make the job much quicker and easier for the do-it-yourself mechanic.
Strut & spring assembly contains:
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
SKA33135
This kit will fit a 2009 Chevrolet Tahoe with MagneRide Suspension.
Yes, this part will fit your 2011 Cadillac Escalade with MagneRide Suspension.
Yes, this part will fit your 2007 Cadillac Escalade ESV as long as your vehicle is equipped with MagneRide Suspension.
These have proper sensors for function and do not require bypass hardware.
This is not the correct part for your vehicle, but we do carry the one you need. The correct part number is: SKA67284.
No, these are only for models equipped with MagneRide.
Neither, these are front coil over struts with rear air shocks.
