Replaces
Frequently bought together
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video we're going to show you how to replace the master power window switch on this 2000 Lincoln Town Car, the same as any '98 to '02 Town Car. It's a pretty easy process. All you need is a flat blade screwdriver. With the master power window switch, a common symptom is that you can put the windows down with their individual switches, but this switch won't control them. Many times it's caused by rain coming in, getting down in and shorting out the switch. It's pretty easy to replace; you just need a regular screw driver. You want to carefully pry up right under here. There's a clip that holds it right here. You can see mine comes right up. It's because it's already been broken. You want to pull it up and then you want to slide it forward and out.
Then let's disconnect these harnesses. They are held in by a little tab, the little U-shaped thing here. Then the tab's right underneath, so press the tab with your finger and pull the connector, down and out. Same thing with this next one, the tabs right here. The grey one, the tabs on the other side; a little harder to get to, just put your thumb up in there, press it, pull it out. Then for this white one, the tab's right there, pull it out. Now the switch itself is just held in. Here's my new one. It has four teeth and those are held into the plastic bezel. You use your screwdriver to pry out and release. Then pry on this one, release. This side of my switch is free so I go to the other side. Pry out; this is already broken a little bit. Then over here, pry out and my switch comes right out. New switch from 1A Auto goes right in. Now you can reconnect everything. Then you're going to put it back down in. You going to want to put the back down and in first and then press down and snap the front in.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
SWA41621
