Replaces
Part Details
Specifications
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
This part fits 2 vehicles spanning 1997-2001.
| Year | Make | Model | Description |
|---|---|---|---|
| 1997-2001 | Lexus | ES300 | Lexus ES300 Front Driver Side Exterior Door Handle TRQ DHA49065 |
| 1997-2001 | Toyota | Camry | Toyota Camry Front Driver Side Exterior Door Handle TRQ DHA49065 |
| Brand Label | Part Number |
|---|---|
| DIY Solutions | BHS01202 |
| Toyota | 69220AA0104M9 |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
DHA49065
You will need replacement screws M6-10 and probably need to trim around lock on new handle to get to fit other than that it’s great
Mostly like OEM. Install fasteners needed different than OEM and are NOT included. Also lock securing screw that is included is too short.
This does not come with any mounting screws. The old handle screws do not fit this handle.
Matched the part perfectly
The drivers side exterior door handle was great, fit my 2001 Camry perfectly. My only problem was the previous handle was secured with self tapping screws into plastic, the new handle had metal inserts. Because the new part didn't come with screws, I had to find metric machine screws at the hardware store to get the job done.
Fit and looked fine, but does not include replacement bolts. Original are self tapping into plastic but the replacement has metal threads. Will need two metric sized bolts.
Amazing quality
Door handle matches exterior well and fits well, however the original hardware didn't match the threaded holes on the TRQ handle. I had to go to the hardware store, lame.
Works perfectly. Not too tough to install. Seems about the same quality as the original.
Fit was pretty good. Very slight gap on right side near lock. Looks like car body had slight curve and handle bezel is flat. Did have to purchase M6 screws as the existing screws from the 98 Camry were self tapping not machine screws. Not quite as sturdy feeling as the original handle, but seems to do the job. Video from QR was helpful, didn't require as much take apart as video on product page. Still a tricky install getting rods out of old clips. Went back together easier than take-down.
No, this part will not fit the 2000 Toyota Solara. We do carry the front pair of exterior door handles for your vehicle. The part number is DHA37213. These handles come black and can be painted by the buyer.
You will need three bolts to secure this part to your door on the backside. The three M6 x 12MM may be accurate based upon your existing mounting hardware. You may reuse the existing lock cylinder and clips to secure the connecting rods on the backside too.
