Replaces
Replaces Honda Accord Front & Rear 16 Piece Steering & Suspension Kit TRQ PSA56181
$484.95
Replaces 1994-97 Honda Accord Front & Rear 6 Piece Suspension Kit TRQ PSA39191
$345.95
Replaces 1994-97 Honda Accord Front & Rear 4 Piece Strut & Spring Assembly Set TRQ SCA57078
$313.95
Replaces Honda Accord Acura CL Front 4 Piece Drivetrain Kit TRQ CSA80131
$280.95
Replaces Honda Accord Acura CL Front 4 Piece Drivetrain Kit TRQ CSA80135
$248.95
Replaces 1994-97 Honda Accord 2 Door Complete Carpet Auto Custom Carpets 14549-160-1115000000
$245.95
Replaces 1994-97 Honda Accord 4 Door Complete Carpet Auto Custom Carpets 14678-160-1085000000
$245.95
Replaces 1994-97 Honda Accord 4 Door Complete Carpet Auto Custom Carpets 14678-160-1077000000
$245.95
Replaces 1994-97 Honda Accord 4 Door Complete Carpet Auto Custom Carpets 14678-160-1115000000
$245.95
Replaces 1994-97 Honda Accord 2 Door Complete Carpet Auto Custom Carpets 14549-160-1077000000
$245.95
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com your source for quality replacement parts and the best service on the internet.
Hi I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing or maintaining your vehicle. I'm going to use my 20 plus years' experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly that's going to save you time and money. Thank you and enjoy the video.
In this video we will be showing you how to replace a taillight on this 1995 Accord, same as any 94 to 97 Accord and the only tool you'll need is a 8 mm socket with a ratchet and extension.
If you've had a little incident and you've broken a taillight or you just need to replace the bulbs, I'm going to take you through that. It actually starts in the trunk. There's supposed to be a little access panel and you see it's missing on this side, on this side, here it is, it just has a little lock and it comes off. We're going to concentrate over here. Trunk here, if you just looking to replace your bulbs it's easy enough, you just twist and pull out and then the bulbs pull out of a socket; same thing with the upper one I think and another one here. Now if you want to replace your whole assembly there's just 4 bolts and they're 8 mm. There's 2 up here that have these little wire clips on them, pull off the wire clip. If one of the clips doesn't want to come off just use a screwdriver, a little force and now remove these 4 8 mm nuts, one is right down here.
Okay and you may run in to this where this one is broken and I'll show you what to do afterwards. Okay, so then the taillight comes out and you can see this stud broke. What you'll want to do is just get a little wrench and put the wrench on there and then get that stud out of there. Now you can see here, here's obviously our original light, here's our new one from 1A Auto. All the mounting points are the same and obviously that studs not broken and then obviously on the other side it looks all the same just a little brighter and shinier. The only one thing we will do is we'll take the gasket off of this original one and put it on the new one. Okay, so this is a 10 mm little nut here, that's on and now it comes right off. I have my nut to use on the new light. Okay, so we have our new light with the gasket all on. Feed it right in, looking from the back side to line up the studs.
Okay, so now we put our 8 mm nuts back on. They don't need to be incredibly tight, they just need to be firm, hand tight; snug. Then put these wire clips back on to keep it up and out of the way. Okay and then this one is our backup light, put that in and lock it. Okay, our signal, actually I guess this one goes down here. It looks like they are kind of keyed so you can only put them in the right place. Okay, this one does go up here, and twist, and then this one, and twist. Now test it out and you should be all set.
We hope this help you out brought to you by www.1AAuto.com your source for quality replacement parts and the best service on the internet. Please feel free to call us toll-free 888-844-3393. We're the company that's here for you on the internet and in person.
