Replaces
4 Piece Shock & Spring Assembly Set
$208.95
4 Piece Complete Shock Assembly & Shock Absorber Kit
$274.95
8 Piece Suspension Kit
$305.95
10 Piece Steering & Suspension Kit
$309.95
12 Piece Steering & Suspension Kit
$314.95
6 Piece Suspension Kit
$317.95
10 Piece Suspension Kit
$333.95
16 Piece Steering & Suspension Kit
$357.95
16 Piece Steering & Suspension Kit
$409.95
Part Details
Specifications
Product Features
TRQ fully loaded shocks and struts are manufactured using premium raw materials and calibrated to restore original ride comfort. TRQ shocks are fully loaded featuring a pre-loaded bearing plate, upper and lower spring isolator, upper spring seat, coil spring, boot kit, and premium strut. TRQ recommends replacing your shocks or struts in pairs to ensure even wear of components and improved ride comfort. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Replacing struts used to require specialized tools to compress, remove, and transfer the old spring and mount. Our Pre-assembled, complete strut & spring assemblies come with all new parts and make the job much quicker and easier for the do-it-yourself mechanic.
Strut & spring assembly contains:
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
SCA57047
Yes it is a quickstrut assembly, i used a pry bar on the lower arm to slide mine in. Decent part.
Yes, this part will fit your1999 4Runner 2.7 base model.
Yes these are made to factory spec, so they should restore your vehicle to it's factory ride height.
This will fit the following vehicles regardless of drivetrain:
1996-2002 Toyota 4Runner
No, these parts will not lift the front end. These are direct replacements of the original equipment and will bring the vehicle to stock height.
Yes this kit will fit your 1996 Toyota 4Runner SR5 2WD.
Yes, according to the information you provided, this part will fit your vehicle. Please let us know if you have any other questions!
