★★★★★
March 29, 2025
Great product
Great product a at great price ????
Replaces
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Product Features
TRQ suspension kits are manufactured using premium raw materials and coatings for extended service life. Each TRQ suspension component is designed to be a direct, maintenance-free replacement to the stock unit. To extend the life of your steering and suspension components, TRQ recommends replacing components in pairs, sets, or kits. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Install Tip: When replacing steering components, have a professional alignment performed afterwards. This ensures proper tracking and even tire wear.
Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
This part fits 1 vehicle spanning 1994-1999.
| Year | Make | Model | Description |
|---|---|---|---|
| 1994-1999 | Dodge | Ram 1500 Truck | Dodge Ram 1500 Truck Rear Wheel Drive Front 14 Piece Steering & Suspension Kit TRQ PSA59329 |
| Brand Label | Part Number |
|---|---|
| MOOG Chassis Products | ES2080S |
| MOOG Chassis Products | K7206T |
| MOOG Chassis Products | ES3171RLT |
| MOOG Chassis Products | K7217T |
| MOOG Chassis Products | K7239 |
| MOOG Chassis Products | K7275 |
| MOOG Chassis Products | K7271 |
| MOOG Chassis Products | ES3172RLT |
| DIY Solutions | SUS06365 |
| DIY Solutions | SUS00218 |
| DIY Solutions | SUS07789 |
| DIY Solutions | SUS07790 |
| DIY Solutions | SUS00226 |
| DIY Solutions | SUS06607 |
| DIY Solutions | SUS05342 |
| DIY Solutions | SUS07804 |
| Chrysler | 52037627 |
| Chrysler | 52004472 |
| Chrysler | 52037674 |
| Chrysler | 52038728 |
| Chrysler | 52037660 |
| MOOG Chassis Products | K700542 |
| Mevotech | MK7201 |
| Dorman | 531-314 |
| DIY Solutions | SUS00284 |
| MOOG Chassis Products | K7201 |
| Dorman | 539-073 |
| Mevotech | MK7271 |
| Mevotech | MES2080S |
| Mevotech | MK7275 |
| Mevotech | MK7217T |
| Mevotech | MES3172RLT |
| Mevotech | MK7206T |
| Mevotech | MES3171RLT |
| Ford | 6L5Z5495AA |
| Mevotech | MK7239 |
| Ford | 3L2Z5495AA |
| Ford | 2L2Z5K483BA |
| Ford | 6L2Z5K483AA |
| QuickSteer | K7275 |
| QuickSteer | K7201 |
| Dorman - OE Solutions | 539-073 |
| Mevotech Supreme | MES3171RLT |
| Mevotech Supreme | MK7217T |
| Mevotech Supreme | MES3172RLT |
| Mevotech Supreme | MK7206T |
| Mevotech Supreme | MK7239 |
| Mevotech Supreme | MK7201 |
| Mevotech Supreme | MK7275 |
| Mevotech Supreme | MK7271 |
| Mevotech Supreme | MES2080S |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video, we're going to be working with our 2006 Ford Explorer. We're going to show you how to remove and replace your vehicle's sway bar link in the front. If you like this video, please click subscribe. We have a ton more information on this and many other vehicles. If you need these parts for your car, you can follow the link down into the description over to 1AAuto.com. Here are the items you'll need for this repair.
Using a 19mm socket and a breaker bar, loosen the lug nuts on your tire. Raise and support your vehicle. We're doing this on a lift to make it easier to show you what's going on, but this job can be done at home on a jack and jack stands. Finish removing your lug nuts. You should be able to do this by hand at this point but you can use a ratchet if you need to. You can then remove your wheel and tire.
It may be a good idea to apply some penetrating oil to whatever parts you're going to be working with. Put a 17mm wrench on the nut on the top side of your sway bar link and brace it against the frame of the vehicle. You can then use a 16mm socket and ratchet on the bottom to loosen it. The sway bar link on these vehicles is essentially a series of bushing and washers with a sleeve all held together by one long bolt, as opposed to being a one-piece unit like some other vehicles.
You can see ours is pretty rough here, because there's usually not this much slack. That's actually what your bushing is supposed to look like on all four pieces, one on each side. You can see the old ones are worn down or cut there. It looks like they've actually fallen off over time. Once the nut's out, you can try to remove the bolt from the center of the sway bar link. This can be pretty difficult, so if it doesn't come out by hand, don't be afraid to get on there and give it a good hit with a hammer. The sway bar link will disassemble just like that when you pull it out, so just make sure you have all the old bushing material and all the old washers off of it.
Now you sort of need to build the sway bar link into the truck, so we'll start with a washer and then a bushing. We'll go up through the control arm, install a bushing with the tapered end down, followed by another washer, the sleeve, a washer with the cup end facing up, and a bushing with the tapered end facing up. We'll go through the sway bar, install another bushing. You may need to use a screw jack or floor jack to jack up the control arm to get enough slack on that bolt to install the sway bar link. Then install the washer and a nut and tighten your new hardware down. You'll want a 17mm wrench on the nut and a 16mm socket and ratchet on the bolt end. Just tighten that up until it compresses the bushings so you know that everything's nice and tight and there's no slop in there to make any noise when you go over bumps. Once that's down tight, you can lower the weight off of the screw jack or floor jack.
Reinstall the wheel and tire onto your hub. It's easiest to put a lug nut inside of the 19mm socket to start it onto the studs. Get all five of these down as tight as you can by hand, and then we'll torque the wheel once there's some weight on it. Lower the vehicle back down and put partial weight onto the wheel and tire. This means that you may have your jack or lift under the vehicle. Get the tire to touch and let the vehicle come down some without allowing it completely off of the lift or jack. Torque your lug nuts to 100 foot-pounds in a cross pattern.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Tools used
Hey friends, it's Len here at 1A Auto. Today we're working on our 1996 Dodge Ram 1,500 and I want to show you something very basic, replacing front sway bar links. It's going to be super easy. I can do it and you can do it too, and as always if you need this or any other part, you can always check us out at 1aauto.com, thanks.
So one of the first things we're going to do is take off this cotter pin. You can probably do the majority of this without actually having to take off the wheel. It's a little easier with the wheel off, and of course for video purposes it's much easier with the wheel off. If you can't get this cotter pin out, no big deal. Just cut it, break it, do whatever you got to do. There we are. We're going to remove this castle nut right here and this nut up here, and we should be able to get the sway bar link out.
So we're going to take this off right here. 17 millimeter. The same thing for up there. 17 millimeter, ratchet, airgun, whatever you got to do. Using an air gun, of course, make sure you're wearing hand protection and eye protection. There we are. The nut's still in there. put it on a second there. Get it off of there. Set this aside. Nut's on there. There it is. Set that aside. Hammer. We're going to try to bonk this through. Once you get it through this side, it'll come down this side. There we are. Doin' it right. We just got to get it all the way out of there. Let's see. Of course there's grease. Kind of is what it is. That bushing off of there. We don't need that. Cool. Let's take apart the other side at the same time. At that point, the bar will be able to move around and we'll be able to get this out much easier.
All right, so we went over and we did the same thing to the other side. Got it so the sway bar link's ready to come out. Now we can wiggle this bar around a little bit and that's nice because it's going to give us the amount that we need to be able to get this out. Just going to grab a pry bar, just walk this around a little bit and there's our sway bar link. Let's do a quick product comparison and we'll move along.
So here we are friends, a quick product comparison for you. Over here you have your original sway bar link out of the front of a 1996 Dodge Ram 1,500. We just took it out. And over here you have your brand new quality 1A Auto part. Both these parts are created equal. You've got the same overall length, which is very important. You don't want one that's way higher or longer than the other one way or the other. Okay. This comes with a brand new nut right here. Very important. It's got a sealed boot. That's great because it's going to keep the moisture out of there for you. Down this end, take this off of here, you have a neoprene locking nut. Super important. You want to make sure that this doesn't loosen up when you're going down the road. Brand new washers, there's two of them, and of course the brand new bushings as well.
As you could tell, this comes with everything you need to go ahead and mount it into the vehicle. Even a brand new cotter pin. Thank you 1A. I don't see any reason why this wouldn't be a quality part to install into the vehicle, so I'm going to go ahead and do it. And as always, if you need this or any other part, you can always check us out at 1aauto.com. Thanks
We'll take off this neoprene locking nut, one of the bushings and one of the washers. So those all right where we can grab onto them. Okay. Now this is important. The way that these bushings go, there's two sides. There's one with a little flappy thing right there, and then one that's rounded. This little flappy piton goes up inside here, or if you were looking at it from underneath, essentially this goes into the hole. Okay. Just right up in there. So you want to make sure that that faces towards the mounting area on the differential. Just like this. Get this nut off of here. Just going to bring this in. See if I can grab my pry bar. Pull down on this nice and easy. I'm just going to keep wiggling it around. There it is. Take our castle nut. That's the slotted nut, kind of looks a little bit like the top of a castle, that goes on the part with the sway bar. Okay. Grab our bushing, got a little piton. Just going to go in there. Okay.
Washer, they're kind of curved. This curves upward right here, and inward right there. They're not flat. I Don't know if you can see there. The curved up part faces up, it's going to go up like this. So the roundedness fits right in there. Very nice. Neoprene locking bolt, neoprene locking nut. That right on there. Awesome. We're going to do the same to the other side of the vehicle real quick, and then we'll go ahead and snug these down.
All right, so now what we're going to do is we're going to hold the sway bar link right along this edge right here. They made a nice area for you to grab onto with your pliers. I'm going to use a 16 millimeter. Tighten this up. When we tighten this, you don't want to go down until this rubber is completely flattened. You just want it so that this washer is touching and it's kind of squeezing it just a teeny weeny bit. Not very much. Little bit more. Check. Sure, feels good under there. That's perfect. Okay. So you see how much this is the squishing? It's not very much. I didn't crush it, so the washer is all the way down on here. It's not about that. It's just about making sure that it's tight enough so that the sway bar link can't move up and down, but not so tight that you're squeezing these so much that they're ready to blow right out of there.
Because then driving down the road, 100,000 miles, however long it takes, it's going to be a lot of pressure on these things and they're just going to give out over time. So the less amount of pressure on them, the better. We're just going to put this in. There we are. See if we can find where the slot is in the sway bar link. Looks like we're pretty close. Right there. Cool. It's a nice big cotter pin. I really didn't want it to come out. You're just going to bring this all the way down. There we are. Bring this over. Just like that. We know it's nice and tight. It's locked in, that and that right there can not come loose because it's got a dotter pin. This one can't come loose because it's got the neoprene lock in there. Let's move ahead and do the same to the other side.
Thanks for watching. Visit 1aauto.com, your place for DIY auto repairs, for great parts, great service, and more content.
Great product a at great price ????
Good parts at a good price. Thanks!
Everything was great with all the parts but the upper ball joints I had to return
It was a good piece but one of the boots already broke on. E
Love it besides the New front end I also got shocks.it rides and steers like a new truck.will definitely be buying here again ????
The parts that I ordered seem to be of good quality but only time will tell. Definitely better then what was worn out.
My old Dodge Ram was needing a complete front end rebuild after many miles. I checked local big box stores, online rock and found 1A Auto to have the best price. I was concerned about the quality due to the super low price. I was extremely happy once the product arrived. All of the parts were great quality and appears to be as good as the OEM I pulled off. All of the parts have been installed for about 3 months and I have no issues at all. All of the parts matched up perfect. One added bonus is the vast video library from 1A Auto to assist in the removal and installation if you run across an issue. Save some money and rent the necessary tools from the box store they have free loaner tools. I could not be happier with my decision to use 1A Auto I will be a customer for life.
They have what I needed for a good affordable price I know there not big brands and all but its way worth the money and also the costumer service is top notch was missing a part sent them a email and bam few days later is here and the right part also currently installing the parts and they all fit.
Steering & suspension for my truck everything was perfect
At this price I wasn't expecting much. However, they seem to be pretty well made and don't feel overly "cheap". I actually liked the design of the seat bar links better than I have had before. I would purchase again.
PSA59329
They are made of rubber.
These are manufactured by TRQ. TRQ is a high quality, high-end name brand that we offer and back with our 1A Auto Limited Lifetime Warranty.
This is not the correct part for your vehicle, but we do carry the one you need. The correct kits can be found here: <a href="https://www.1aauto.com/search?q=suspension+kit&1998-1463_Drivetrain_fitQualifierFld=4+Wheel+Drive&model=1463&year=1998&searchQuery=suspension+kit" target="_blank">https://www.1aauto.com/search?q=suspension+kit&1998-1463_Drivetrain_fitQualifierFld=4+Wheel+Drive&model=1463&year=1998&searchQuery=suspension+kit</a>
This is not the correct part for your vehicle, but we do carry the one you need. The correct part number is: <a href="https://www.1aauto.com/dodge-ram-1500-2500-12-piece-steering-and-suspension-kit-trq/i/1asfk05274/1140102/1997" target="_blank">https://www.1aauto.com/dodge-ram-1500-2500-12-piece-steering-and-suspension-kit-trq/i/1asfk05274/1140102/1997</a>
This is for RWD models only. It will not be correct for 4WD vehicles.
Hello, thank you for your question. This suspension kit is listed for a rear-wheel drive application.
Hey Ryan, This parts will be our 1A Auto brand. They do come with a limited lifetime warranty as well! If you have any questions feel free to contact us at 888-844-3393. Thank you, Corey
Hello, These parts do not have grease fittings. They are lubricated durring manufacturing and then sealed to prevent contaminants into the boot which would then require maintenance. Thanks!
