Replaces
Install Tip: Keep & reuse your original hardware, new hardware is not included with this item.
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet. Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20+ years' experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly, that's going to save you time and money. Thank you and enjoy the video.
In this video, we're going to show you how to replace the trunk lid support struts on this '95 Civic same as any '94 to '97 sedan or coupe. The only tools you'll need are a 10 mm wrench and a pair of needle nose pliers. If your trunk lid has gotten a little heavier, you'll want to replace these trunk struts. It's pretty easy. All your going to need is a 10 mm wrench and a pair of needle nose pliers. Put the pliers down for right now. A 10 mm wrench on this bolt up here. That comes off. Put that down right here. There's a little piece of trim here that just kind of snaps off with your fingers.
Then use your needle nose pliers and then there's a clip, a C clip right here. I'm just kind of grabbing onto it and pull it off. Then just kind of steady your... I'm just holding the trunk lid with my top hand here. Pull it off, and the trunk lid will stay in the up position with one of them off. Easy enough to put them back on. There's nothing wrong with this one so I'm just going to reinstall it. Put it on the bottom. Top you just kind of have to shake your trunk lid a little bit to get it on there. Just put on this nut. Just thread it on with my hand first and then take my C clip and just kind of put it into place and push it with my thumb a little bit. Then I'm just going to take my needle nose pliers and I'm going to close them up and just use the nose to push it down into place. Put my trim back on and tighten my 10mm nut back up. And you're all set.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free, 888-844-3393. We're the company that's here for you on the internet and in person.
GSA47436
