Kit Includes: (1) Passenger Side Tail Light (1) Driver Side Tail Light
Housing Color: White Bezel
Quantity: 2 Piece
Specification
Side Location
Driver & Passenger Side
Trim
Sport
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Housing ColorWhite Bezel
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Tail Lights 1994-2001 Dodge Ram 1500
Created on:
Tools used
Socket Extensions
Socket Driver
Ratchet
T25 Torx Driver
1. Remove the tail light assembly
Open the tail gate
Unbolt the two T25 screws anchoring the tail light assembly.
Disconnect the wiring harness and remove the bulbs.
Service your bulbs at this point or put your bulbs in the new tail light assembly.
2. Install the tail light assembly
Plug in the bulbs and wiring harness.
Clip the tail light assembly into the vehicle.
Replace the T25 Torx screws.
Close the tail gate
This video is brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet.
In this video, I am going to show you how to replace a tail light on this 1998 Dodge Ram, the same as any 94 to 01. The only tool you will need is a T25 Torx bit with a ratchet and extension or a driver. So, if you open there are two T25 Torx screws. That's probably the hardest part about this; knowing what tool to use. So your taillight pulls out. Then, if you're just looking to change a bulb, just twist these off. Twist these off. If you're looking to change your taillight assembly, new ones from 1A Auto. The bulbs pull right out. Push back in.
Reassembly is just a reversal of the procedure. There are pins back here that line up with holes in the cork panel. Make sure you line everything up. Push it on. Reinstall your screws.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts, and the best service on the internet. Please feel free to call us toll free 888-844-3393. We are the company that's here for you on the internet and in person.
1ALTP00473
In Stock
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Dodge is a registered trademark of FCA US LLC. 1A Auto is not affiliated with or sponsored by Dodge or FCA US LLC.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.