Replaces
Part Details
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1aauto.com, your source for quality replacement parts and the best service on the Internet.
Hi. I'm Don from 1A Auto. I hope this how-to video helps you out. The next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a headlight assembly on a '97 Buick LeSabre. The operation can be the same for model years '97 through '99. You'll need a 10-mm socket and socket wrench and a new headlight assembly from 1A Auto. This video is going to help you out whether or not you're just looking to change a bulb, or maybe your car has got some miles on it. The lights have gotten cloudy and faded, and you want to take it from this to looking like this. A new set of headlights from 1A Auto can really help take a few "miles" off the front end of your car. So you can go from before to after.
Using my 10mm socket and wrench to remove the 2 10mm bolts. I'm going to pull the headlight out just a little bit and then push to the outside and pull it out. To service the bulbs, I'm going to remove the harness here just to get it out of the way. These are twist style bulbs, so I'm just going to give them a little bit of a twist and pull them out. To remove this bulb from the socket, I'm going to lift up on these tabs and pull it out. Re-installation is the same way. Just pop it right in. Align your tabs with the inside of the headlight assembly and twist it back into place.
So the outboard bulb is the same. In order to service this parking light or the blinker, you're going to do the same thing. Twist, and then this bulb will actually just pull straight out. We're going to need to swap over the harness here. In order to do that, I'm going to take out the bulbs. At the old headlight here, you can see all the crazing and pitting on the glass. Then we've already got our new one from 1A Auto that's clear and ready to go. Reattach the harness. Putting the headlight back in. I'm going to match up these three tabs over with the corner metal. Make sure my gasket is put in. Reinstall the 2 10-mm bolts. Once you've got it all bolted back in, go ahead and turn them on. Make sure they're all working and operating correctly.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the Internet and in person.
